EMC Equipment

Impulse Voltage Insulation Testers

 

IEC 60060-1 applies to dielectric tests with alternating voltage, dielectric tests with direct voltage, dielectric tests with impulse voltage and dielectric tests with combinations of the above. The MIG series of insulation testers from EMC Partner covers the impulse voltage requirement up to 100 kV. HV TECHNOLOGIES, Inc. also provides impulse voltage test equipment above 100 kV and test equipment which satisfies the other requirements from IEC 60060-1. Click on the following links for additional information:

Impulse voltage generators (greater than 100 kV)

AC/DC Test Transformers

Resonant Test Systems

VLF Hipot Testers

Applicable Standards:

  • IEC 60060-1
  • IEC 60060-3
  • IEC 61180
  • IEC 61010-1

BROCHURE:  INSULATION TESTERS


 Impulse Voltage Insulation Testers

 

 

MIG0603

  • 1.2/50 µs voltage waveform up to 6 kV
  • Output on top
  • Solid state switching
  • Electronic polarity change
  • Safety enclosure
  • Integrated voltage and current peak measurement
  • BNC monitoring output of voltage and current wave shapes

MIG1203

  • 1.2/50 µs voltage waveform up to 12 kV
  • Output on top
  • Solid state switching
  • Electronic polarity change
  • Safety enclosure
  • Integrated voltage and current peak measurement
  • BNC monitoring output of voltage and current wave shapes

MIG1803

  • 1.2/50 µs voltage waveform up to 18 kV
  • Output on top
  • Solid state switching
  • Electronic polarity change
  • Safety enclosure
  • Integrated voltage and current peak measurement
  • BNC monitoring output of voltage and current wave shapes

MIG2403

  • 1.2/50µs voltage waveform up to 24kV
  • Output on top
  • Solid state switching
  • Electronic polarity change
  • Safety enclosure
  • Integrated voltage and current peak measurement
  • BNC monitoring output of voltage and current wave shapes

MIG3603C

  • 1.2/50 µs voltage waveform up to 36 kV
  • Output on top
  • Solid state switching
  • Electronic polarity change
  • Safety enclosure
  • Integrated voltage and current peak measurement
  • BNC monitoring output of voltage and current wave shapes

MIG4803

  • 1.2/50 µs voltage waveform up to 48 kV
  • Output on top
  • Solid state switching
  • Electronic polarity change
  • Safety enclosure
  • Integrated voltage and current peak measurement
  • BNC monitoring output of voltage and current wave shapes

Please contact us for any insulation testers with output voltages greater than 48 kV. 

 

Request a Quote Here